полититанат калия

The new materials obtained in the potassium polytitanate (PPT)–MnSO₄ system by modifying PPT in aqueous solutions of manganese sulfate of various concentrations, followed by thermal treatment and annealing at 1080°C, were synthesized and studied. The phase composition of the obtained materials was determined. Their electrochemical and electrophysical properties in the temperature range from 250 to 700°C were studied.

Work is devoted to the study of electrochemical and dielectric properties of the base potassium polytitanate and polymer composite based on it. The temperature dependence of ac-conductivity, permittivity, dielectric loss tangent. An increase in the dielectric constant of the composite with respect to the values of the dielectric constant of the base potassium polytitanate. The values of the dc-conductivity.

The work is devoted to investigation of the anisotropy of conductivity and determination of the most likely charge carriers in the amorphous polytitanate potassium. Defined ac – and dc-conductivity, dielectric permittivity, dielectric loss tangent in mutually perpendicular directions compacted potassium polytitanate.
An increase in the shift of the peak and the dielectric loss tangent in a frequency region when measured along the preferred direction location lamellae potassium polytitanate.

In the temperature range from 25 to 100 °C, the behavior of the conductivity and the electrical characteristics of potassium polytitanate modified iron sulfate at a pH modifying solution from 2.0 to 9.0. The temperature dependence of ac-conductivity, permittivity, conductivity activation energy evaluated.

The behavior of the conductivity and of electrophysical characteristics of potassium polytitanate modified by cobalt (II) sulphate was investigated under the temperature from 100 to 800 °C. The temperature dependence of AC and DC-conductivity was found, activation energy was appreciated in the low and high temperature phases. A equivalent circuit describing the transport processes in the studied composite based on potassium polytitanate was proposed.-

The influence of the pH value in the dispersions during washing the potassium polytitanate powder (PPT) after its molten salt synthesis on electrical properties of the obtained product, namely conductivity, permittivity and tangent of dielectric losses. It is established that the samples obtained in weakly alkaline conditions (pH = 7.44 and 8.50), are characterized by higher values of low-frequency conductivity and dielectric permittivity (up to 10^{5), low value of the relaxation time (0.112 and 0.358, respectively).

DOI: https://doi.org/10.18500/1608-4039-2017-17-4-225-234

The paper considers the electrochemical properties of potassium polytitanate synthesized at the values of pH varying from 3 to 8 in a wide temperature range from ? 26 to + 80°C. The conductivity values and the activation energy were determined with the help of the method of impedance spectroscopy. The application of the obtained material used as a ceramic solid electrolyte in the energy storage units operating at low temperatures in the Far North is considered in the article.