ISSN 1608-4039 (Print)
ISSN 1680-9505 (Online)


For citation:

Yudina A. V., Ignatova A. A., Shuvalova N. I., Martynenko V. M., Yarmolenko O. V. Influence of additives of EMIBF4 and BMIBF4 ionic liquids on the properties of network polymer electrolytes for lithium power sources. Electrochemical Energetics, 2014, vol. 14, iss. 3, pp. 158-163. DOI: 10.18500/1608-4039-2014-14-3-158-163, EDN: TQCJPX

This is an open access article distributed under the terms of Creative Commons Attribution 4.0 International License (CC-BY 4.0).
Full text:
(downloads: 97)
Language: 
Russian
Article type: 
Article
EDN: 
TQCJPX

Influence of additives of EMIBF4 and BMIBF4 ionic liquids on the properties of network polymer electrolytes for lithium power sources

Autors: 
Yudina Alena Vladimirovna, Institute of Problems of Chemical Physics of RAS
Ignatova A. A., Saratov State University
Shuvalova Natal'ya Ivanovna, Institute of Problems of Chemical Physics of RAS
Martynenko Vyacheslav Mikhaylovich, Institute of Problems of Chemical Physics of RAS
Yarmolenko O. V., Institute of Problems of Chemical Physics of RAS
Abstract: 

The effect of 1-ethyl-3-methylimidazolium tetrafluoroborate (EMIBF4) and 1-butyl-3-methylimidazolium tetrafluoroborate (BMIBF4) ionic liquids on the properties of the polymer electrolyte based on polyethylene glycol diacrylate (PEG-DA) and LiBF4 salt was studied. Research was carried out by spray-mass spectroscopy, differential scanning calorimetry, and electrochemical impedance spectroscopy technique in the temperature range from -40 to 120 °C. The best polymer electrolyte composition is the ratio of PEG-DA: LiBF4: EMIBF4 = 1: 1: 6.5 mole with a conductivity of 2.55\cdot 10-3 S/cm at 20 °C, 2.20\cdot 10-4 S/cm at -40 °C and the glass transition temperature -103 °C.

Reference: 

1. Electrochemical Aspects of Ionic Liquids, H. Ohno (ed.) New Jersey, John Wiley \& Sons, Inc., 2005, 468 p.
2. Evshhik E. Ju., Jarmolenko O. V. Polimernye jelektrolity na osnove ionnyh zhidkostej dlja litievyh akkumuljatorov [Polymer electrolytes based on ionic liquids for lithium batteries]. Al'ternativnaja jenergetika i jekologija [Alternative Energy and Ecology], 2013, no. 01/2 (118), pp. 126–140 (in Russian).
3. Yarmolenko O. V., Khatmullina K. G., Tulibaeva G. Z., Bogdanova L. M., Shestakov A. F. Towards the mechanism of Li+ transfer in the net solid polymer electrolyte based on Poly(ethylene glycol) diacrylate – LiClO4. J. Solid State Electrochem, 2012, vol. 16, no. 10, pp. 3371–3381.
4. Gray F. M. Solid Polymer Electrolytes : Fundamental and Technological Applications. New York, VCH Publ., 1991, 254 p.
5. Gray F. M. Polymer electrolytes. Cambridge, Royal Society of Chemistry, 1997, 175 p.
6. Agrawal R. C., Gupta R. K. Review Superionic Solids : composite electrolyte phase an overview. J. Mater. Sci., 1999, vol. 34, pp. 1131–1162.
7. Kim G. T., Appetecchi G. B., Carewska M., Joost M., Balducci A., Winter M., Passerini S. UV cross-linked, lithium-conducting ternary polymer electrolytes containing ionic liquids, J. Power Sources, 2010, vol. 195, pp. 613–6137.
8. Evshhik E. Ju., Bubnova M. L., Dzhavadjan Je. A., Jarmolenko O. V. Osobennosti sinteza polimernogo jelektrolita diakrilat polijetilenglikolja – LiBF4 v prisutstvii ionnoj zhidkosti 1-butil-3-metil imidazolij tetraftorborat. Vestnik Bashkirskogo Gosudarstvennogo universiteta [Bulletin of the Bashkir State University], 2012, vol. 17, no. 1, pp. 51–58 (in Russian).
9. Tager A. A. Fiziko-himija polimerov [Physics Chemistry of Polymers]. Moskva, Nauchnyj mir Publ., 2007, 573 p. (in Russian).

Received: 
15.09.2014
Accepted: 
30.09.2014
Published: 
30.09.2014