ISSN 1608-4039 (Print)
ISSN 1680-9505 (Online)


For citation:

Fedorov N. A., Uvarov N. F., Ulihin A. S. Preparation of polymer electrolytes based on polyurethane elastomer by the swelling method. Electrochemical Energetics, 2024, vol. 24, iss. 4, pp. 191-195. DOI: 10.18500/1608-4039-2024-24-4-191-195, EDN: QEQOVI

This is an open access article distributed under the terms of Creative Commons Attribution 4.0 International License (CC-BY 4.0).
Full text:
(downloads: 25)
Language: 
Russian
Article type: 
Article
UDC: 
544.6.018.49
EDN: 
QEQOVI

Preparation of polymer electrolytes based on polyurethane elastomer by the swelling method

Autors: 
Fedorov Nikita Alexandrovich, Institute of Chemistry of a Solid body and Mechanochemistry of the Siberian Branch of RAS
Uvarov Nikolai F., Institute of Chemistry of a Solid body and Mechanochemistry of the Siberian Branch of RAS
Ulihin Artem S., Institute of Chemistry of a Solid body and Mechanochemistry of the Siberian Branch of RAS
Abstract: 

The search for solvents to prepare polymer electrolytes based on polyurethane elastomer by swelling method was carried out. The greatest swelling was observed in N-methyl-2-pyrrolidone, and the maximum degree of swelling was reached in 24 hours at 25°C. The swelling effect decreased with increasing the salt concentration. The ionic conductivity of the polymer electrolytes reached the maximum of 6–8·10-4 S/cm at 5 wt% of lithium salt. Using the method of galvanostatic cycling it was shown that the electrolyte was reversible by lithium ions and electrochemically stable in the voltage range up to 4.8 V

Reference: 
  1. hargeable Li batteries. Chemistry of Materials, 2010, vol. 22, no. 3, pp. 587–603. https://doi.org/10.1021/cm901452z
  2. Fergus J. W. Ceramic and polymeric solid electrolytes for lithium-ion batteries. J. Power Sources, 2010, vol. 195, no. 15, pp. 4554–4569. https://doi.org/10.1016/j.jpowsour.2010.01.076
  3. Barteau K. P., Wolffs M., Lynd N. A., Fredrickson G. H., Kramer E. J., Hawker C. J. Allyl glycidyl ether-based polymer electrolytes for room temperature lithium batteries. Macromolecules, 2013, vol. 46, no. 22, pp. 8988–8994. https://doi.org/10.1021/ma401267w
  4. Sun B., Mindemark J., Edstrom K., Brandell D. Polycarbonate-based solid polymer electrolytes for Liion batteries. Solid State Ionics, 2014, vol. 262, pp. 738– 742. https://doi.org/10.1016/j.ssi.2013.08.014
  5. Andersson R., Hernández G., See J., Flaim T. D., Brandell D., Mindemark J. Designing polyurethane solid polymer electrolytes for hightemperature lithium metal batteries. ACS Applied Energy Materials, 2022, vol. 5, no. 1, pp. 407–418. https://doi.org/10.1021/acsaem.1c02942
  6. Adolf E. Equilibrium swelling of polyurethane elastomer. Rubber Chemistry and Technology, 1990, vol. 63, no. 1, pp. 56–65. https://doi.org/10.5254/1.3538242
  7. Nierzwicki W., Majewska Z. Swelling properties of urethane elastomer and their bearing on microphase separation. J. Applied Polymer Science, 1979, vol. 24, pp. 1089–1099. https://doi.org/10.1002/app.1979.070240421
  8. Shibayama K., Kodaria M. Effects of concentration of urethane linkage, crosslinking density, and swelling upon the viscoelastic properties of polyurethanes. J. Polymer Science, 1966, vol. 4, pp. 83– 108. https://doi.org/10.1002/pol.1966.150040106
Received: 
14.10.2024
Accepted: 
28.10.2024
Published: 
25.12.2024