ISSN 1608-4039 (Print)
ISSN 1680-9505 (Online)

For citation:

Volynskii V. V., Lopashev A. V., Kazarinov I. A., Kolesnikov I. V. Utilization of lamellar nickel-oxide electrodes. Electrochemical Energetics, 2004, vol. 4, iss. 3, pp. 165-?.

This is an open access article distributed under the terms of Creative Commons Attribution 4.0 International License (CC-BY 4.0).
Language: 
Russian
Article type: 
Article

Utilization of lamellar nickel-oxide electrodes

Autors: 
Volynskii Vyacheslav Vital'evich, JSC AIT Plant
Lopashev A. V., JSC AIT Plant
Kazarinov Ivan Alekseevich, Saratov State University
Kolesnikov I. V., JSC AIT Plant
Abstract: 

The paper suggests a new way of more effective use of nickel in the production of alkaline cells with pocket-plate oxide-nickcl electrodes which also helps reduce pollution of the environment.
To get the desired effect you should separate the metal part of the electrode from the anode material by deforming pocket-plate oxide- nickel electrodes at the pressure of 19-45 H/mm2 during 0.5-1 second, then extract and leach anode material with sulphuric acid solution (its strength is 200-300 g/1) at 60-80°C till ion concentration reaches Ni2+ 65-110 g/l and pH = 3.5-5.