ISSN 1608-4039 (Print)
ISSN 1680-9505 (Online)


modelling

Research and development of catalytic layers for fuel cells with solid polymer electrolyte.

Composition and structure of proton-exchange membrane (PEM) fuel cell catalytic layers were investigated. The maximum FC efficiency was observed at the polymer content in a layer 25-30 vol. % at work on air and 30-35 vol. % at work on oxygen. At a variation of quantity of catalytic composition the maximum current density have been received at layer load 1.75 mg/sm2, thus decrease in it value in 2 times leads to falling of current density only on 10 %. 

Modelling of thermomechanical stresses in a tubular design SOFC

Computer modelling of the mechanical stress state originating at manufacturing and heating to a working temperature of cells of the SOFC of a tubular design with classical functional materials (Ni-YSZ)/YSZ/LSM is developed. Electrolyte-supported and anode-supported cells are observed, and also the residual stresses originating by manufacture of the module a cone-cone with direct anode-cathode contact are simulated. Simulation of process of manufacturing anode-supported cells display that there is no the stress, able to lead to cell rupture.